auto parts inner cv boot kit 04437-21022 Rubber boot for Toyota

Our Advantage is

1. Full stock of all kinds of car types .

2. high quality

3. delivery fast.

4. warranty 1 year

Number :FL-020

OE Number:04437-21022

The cv.boot repalcement

When the cv.joint is damaged , you will hear a “clicking” or “knocking” sound when making turns. This is a sign that the whole CV axle needs to be replaced. If no noise is present and only the CV boot is broken, you can replace just the CV boot.

Disassembly

1. Pull off the big Clip

2. Pull off the small clip.

3. Turn the boot out of the drive axle side

4. Joint has to be pulled off the shaft by tapping with hammer

Assembly

1. Place Circlip into the groove of the shaft

2. Fill about half the grease supplied into the joint

3. Move joint carefully with hammer until circlip expands to fit its funciton position.

4.Fill remaining grease into the cv.joint and boot .

5.Put the cv.joint boot on the correct position.

6.Ventilate the cv.boot by the tool.

7.Set the big clip by hand as tight as possible and lock it with pillers.

8.Set the small clip by hand as tight as possible and lock it with pillers.

9.Check close fit of the clip. And the boot must be in full contact with the joint and the shaft.

Model for car :TOYOTA NADIA SXN15 4WD 1998-2003

Guangzhou Hongzhou Auto Parts Co. Ltd. is a manufacturer of cv joint, drive shaft and steering racks. It  was founded in 1995, and is located in GuangZhou China .

Our factory covers an area of  over 3,000 square meters, and we have 120 engineers, technicians  and mechanics. Our annual  production capacity is over 100,000 units . We organize production in strict accordance with quality standards of ISO/TS16949.  By the skilled technology and dedicated service, all of our employees  will do our best to meet your any requirment. And, we look forward to being your long-term cooperative partner.

As a professional manufacturer of cv joints, drive shafts and steering racks, our auto parts are sell well in the world market by high quality, competitive price. And importantly, we have a professional  team of  After-sale serive. They will give you and your customers whole-hearted and professional advice and help in the process of purchase and use.

We produce cv joints, drive shafts and steering racks for TOYOTA, MITSUBISHI, HONDA, SUZUKI, NISSAN, DAIHATSU, MANZDA, FORD, CHEVY, BUICK, DAEWOO, KIA, VOLKSWAGEN, MERCEDES-BENZ, BMW, AUDI, VOLVO, FIAT, LADA, ALFA, SKOKA, and so on.

Our company insist in honest and trustworthy, price excellent and "customer first". You are warmly welcome to visit and purchase.

Contact us ! And WIN-WIN.